mangadap.datacube.datacube module
Base class for a datacube
Copyright © 2019, SDSS-IV/MaNGA Pipeline Group
- class mangadap.datacube.datacube.DataCube(flux, wave=None, ivar=None, mask=None, bitmask=None, sres=None, covar=None, axes=[0, 1, 2], wcs=None, pixelscale=None, log=True, meta=None, prihdr=None, fluxhdr=None, name=None)[source]
Bases:
object
Base container class for a rectilinear datacube.
Datacubes have three axes: two spatial coordinates and one spectral. The datacubes are expected to be rectilinear; i.e., each spatial position has the same spectral range and each wavelength channel has the same spatial coordinates.
On input, the ordering of the three dimensions can be arbitrary; however, the axes are re-ordered for the internal attributes such that wavelengths are ordered along the last axis, with the first two axes being the spatial coordinates. Nominally the spatial coordinates are ordered predominantly coincident with right-ascension (E toward smaller pixels numbers in axis 0) and declination (N toward larger pixel numbers in axis 1); however, rotation of the datacube spatial coordinates can be non-zero with respect to the celestial coordinates, as given by the provided world-coordinate system.
The wavelength vector applicable to all spatial positions can either be provided directly or constructed from the provided WCS. Any directly provided
wave
vector takes precedence over the WCS.Spatial covariance/correlation can be provided via the
covar
keyword argument. If provided as a single array, the provided array is used to define the correlation matrix and is assumed to be identical for all wavelength channels. More options are available if the input is provided as aCovariance
object. The ordering of the covariance/correlation matrix is expected to provide the correlation between the row-major flattened version of the spatial coordinates. That is, for a datacube with spatial shape \((N_x,N_y)\), the covariance/correlation value at location \(i,j\) is the correlation between pixels at 2D locations \((i_x,i_y)\) and \((j_x,j_y)\), where\[\begin{split}\begin{array}{rcl} i_x & = & \lfloor i/N_y \rfloor, \\ i_y & = & i - i_x N_y, \\ j_x & = & \lfloor j/N_y \rfloor, {\rm and} \\ j_y & = & j - j_x N_y. \end{array}\end{split}\]If the values of
axes
indicates that the provided flux array should have it’s spatial axes transposed (i.e.axes[0] > axes[1]
), the provided covariance/correlation data is appropriately restructured to correspond to the wavelength channels influx
(again assuming a flattened row-major memory block); seetranspose_raw_shape()
.See Creating a new DataCube subclass for instructions on subclassing this object for non-MaNGA datacubes.
- Parameters
flux (numpy.ndarray) – Data array with the flux as a function of spatial and spectral position. Shape should be \((N_x, N_y, N_\lambda)\).
wave (numpy.ndarray, optional) – The wavelength vector associated with each spatial position. Shape is \((N_\lambda,)\). If None,
wcs
must be provided such that the wavelength vector can be constructed.ivar (numpy.ndarray, optional) – The inverse variance of the flux array. Shape must be the same as
flux
. If None, errors are ignored.mask (numpy.ndarray, optional) – Mask array for the flux measurements. Can be a boolean mask (False=unmasked,good; True=masked,bad) or an integer array associated with the provided
mangadap.util.bitmask.BitMask
object (seebitmask
). Shape must be the same asflux
.bitmask (
mangadap.util.bitmask.BitMask
, optional) – Object used to select and toggle masked pixels frommask
. If None, any providedmask
must be a boolean array or can be successfully converted to one.sres (numpy.ndarray, optional) – The spectral resolution, \(R = \lambda / \Delta\lambda\). Can be a single vector with shape \((N_\lambda,)\), if the spectral resolution is independent of spatial position, or a 3D datacube with a spatially and spectrally dependent resolution with a shape that matches
flux
. If None, spectral resolution is ignored.covar (array-like,
mangadap.util.covariance.Covariance
, optional) – The spatial covariance in one or more wavelength channels. If None, no covariance is assumed. See usage and interpretation in class description.axes (
list
, optional) – The axes with the \(x\), \(y\), and \(\lambda\) in the provided flux array. For example,[2,1,0]
means the spectra are organized along the first axis.wcs (astropy.wcs.WCS, optional) – World-coordinate system for the 3D datacube. If None, spatial coordinates are set to be centered with a pixelscale in arcsec (see
pixelscale
).pixelscale (
int
,float
, optional) – Spatial extent in arcsec of each spaxel in the datacube, assumed to be square. Superseded bywcs
, if the latter is provided. If thewcs
is not provided and the pixelscale is not provided upon instantiation, it is set to unity.log (
bool
, optional) – Flag that the datacube spectral pixels are binned logarithmically in wavelength.meta (
dict
, optional) – A free-form dictionary used to hold metadata relevant to the datacube. Metadata required by analysis modules are indicated where relevant. If None,meta
is instantiated as an empty dictionary and populated with the bare minimum needed to execute the DAP. NOTE: Currently this is a required argument because an estimate of the redshift is needed to execute the DAP.prihdr (astropy.io.fits.Header, optional) – Primary header read from datacube fits file. If None, instantiated as an empty astropy.io.fits.Header.
fluxhdr (astropy.io.fits.Header, optional) – Header specifically for the flux extension of the datacube fits file. If None, set to be a copy of the primary header.
- Raises
ValueError – Raised if the wavelength vector cannot be produced, if the WCS has the wrong dimensionality, or if there are any shape mismatches between the input data arrays.
TypeError – Raised if the input metadata are not provided as a dictionary.
- original_axes
Original axis order.
- Type
- shape
Datacube shape.
- Type
tuple
- spatial_shape
Shape of the datacube spatial axes .
- Type
tuple
- nwave
Number of wavelength channels.
- Type
int
- spatial_index
Array of tuples with the spatial indices of each spectrum in the flattened datacube.
- Type
- wcs
Datacube world-coordinate system. Can be None.
- Type
- pixelscale
Spatial extent in arcsec of each spaxel in the datacube, assumed to be square. Only used if
wcs
is None.- Type
float
- log
Flag that the datacube spectral pixels are binned logarithmically in wavelength.
- Type
bool
- meta
A free-form dictionary used to hold meta data relevant to the datacube. Metadata required by analysis modules are indicated where relevant. If no metadata has been defined,
meta
is instantiated as an empty dictionary.- Type
dict
- wave
Wavelength vector applicable to all spatial positions.
- Type
- flux
Datacube flux array.
- Type
- ivar
Datacube flux inverse variance. Can be None.
- Type
- mask
Datacube mask. Can be None.
- Type
- sres
Datacube spectral resolution. Can be None.
- Type
- covar
Datacube spatial covariance. Can be None.
- prihdr
Primary header for the datacube. If not provided on instantiation, set to an empty astropy.io.fits.Header.
- fluxhdr
Header specifically for the flux array. If not provided on instantiation, set to be a copy of
prihdr
.
- rss
The source row-stacked spectra used to build the datacube.
- sigma_rho
The \(\sigma_{\rho}\) of the Gaussian function used to approximate the trend of the correlation coefficient with spaxel separation. Used to construct the approximate correlation matrix (see
approximate_correlation_matrix()
).- Type
float
- correl_rlim
The limiting radius of the image reconstruction (Gaussian) kernel in arcseconds. Used to construct the approximate correlation matrix (see
approximate_correlation_matrix()
).- Type
float
- approx_correl
Approximate correlation matrix; see
approximate_correlation_matrix()
.- Type
- _get_pixelscale()[source]
Measure the pixel scale using the WCS.
The method uses the coordinates of 4 adjacent pixels to compute the pixel area. Assuming the pixels are square and that the pixel scale is constant in square arcsec over the full image, the square-root of the area is the pixel scale.
The method will fault if
wcs
is None.- Returns
The estimated pixel scale.
- Return type
float
- _get_wavelength_vector()[source]
Use the astropy.wcs.WCS attribute (
wcs
) to generate the datacube wavelength vector.wcs
cannot be None and the wavelength coordinate system must be defined along its third axis.- Returns
Vector with wavelengths along the third axis defined by
wcs
.- Return type
- Raises
- approximate_correlation_matrix(sigma_rho, rlim, rho_tol=None, redo=False)[source]
Construct a correlation matrix with correlation coefficients that follow a Gaussian in 2D pixel separation.
This method constructs a correlation matrix with correlation coefficients defined as
\[\rho_{ij} = \exp(-D_{ij}^2 / 2\sigma_{\rho}^2)\]where \(D_{ij}\) is the distance between two spaxels in the spatial dimension of the datacube (in the number spaxels, not arcsec). Any pixels with \(D_{ij} > R_{\rm lim}\) is set to zero, where \(R_{\rm lim}\) is the limiting radius of the kernel used in the datacube rectification; this is provided here as
rlim
in arcsec, which is converted to spaxels usingpixelscale
.We found in Westfall et al. (2019, AJ, 158, 231) that this is a reasonable approximation for the formal covariance that results from Shepard’s rectification method.
There is an unknown relation between the dispersion of the kernel used by Shepard’s method and the value of \(\sigma_{\rho}\). Tests show that it is tantalizingly close to \(\sigma_{\rho} = \sqrt{2}\sigma\), where \(\sigma\) is in pixels instead of arcsec; however, a formal derivation of this hasn’t been done and is complicated by the focal-plane sampling of the row-stacked spectra.
Within the limits of how the focal-plane sampling changes with wavelength, we found the value of \(\sigma_{\rho}\) varies little with wavelength in MaNGA. Here, we assume \(\sigma_{\rho}\) is fully wavelength independent. Therefore, once this method is run once, it doesn’t need to be run again for different wavelength channels. To force the correlation matrix to be recreated, use
redo
or change the provided \(\sigma_{\rho}\).- Parameters
sigma_rho (
float
) – The \(\sigma_{\rho}\) of the Gaussian function used to approximate the trend of the correlation coefficient with spaxel separation.rlim (
float
) – The limiting radius of the image reconstruction (Gaussian) kernel in arcseconds.rho_tol (
float
, optional) – Any correlation coefficient less than this is assumed to be equivalent to (and set to) 0.redo (
bool
, optional) – Force the recalculation of the cube dimensions if they are already defined and \(\sigma_{\rho}\) has not changed.
- Returns
Correlation matrix
- Return type
- approximate_covariance_cube(channels=None, sigma_rho=None, rlim=None, rho_tol=None, csr=False, quiet=False)[source]
Return the approximate covariance matrices for many wavelength channels.
This is a simple wrapper for
approximate_covariance_matrix()
that iteratively builds the covariance matrix for each wavelength channel.If
approx_correl
is not yet constructed (seeapproximate_correlation_matrix()
),sigma_rho
andrlim
must be provided.- Parameters
channels (
int
, array-like, optional) – Indices of the spectral channels for which to calculate the covariance matrix. If None, the covariance matrix is calculated for all channels.sigma_rho (
float
, optional) – The \(\sigma_{\rho}\) of the Gaussian function used to approximate the trend of the correlation coefficient with spaxel separation.rlim (
float
, optional) – The limiting radius of the image reconstruction (Gaussian) kernel in arcseconds.rho_tol (
float
, optional) – Any correlation coefficient less than this is assumed to be equivalent to (and set to) 0.csr (
bool
, optional) – Instead of returning amangadap.util.covariance.Covariance
object, return the covariance matrix as a scipy.sparse.csr_matrix object. Primarily used byapproximate_covariance_cube()
for collating the covariance matrix of each wavelength channel before combining them into a singlemangadap.util.covariance.Covariance
object.quiet (
bool
, optional) – Suppress terminal output
- Returns
mangadap.util.covariance.Covariance
, numpy.ndarray: Ifcsr
is True, the returned object is an numpy.ndarray of scipy.sparse.csr_matrix types.
- approximate_covariance_matrix(channel, sigma_rho=None, rlim=None, rho_tol=None, csr=False, quiet=False)[source]
Return an approximate calculation of the covariance matrix assuming
\[C_{ij} = \rho_{ij}(V_{i} V_{j})^{1/2}\]where \(\rho_{ij}\) is approximated by
approximate_correlation_matrix()
and \(V_i\equiv C_{ii}\) are the variances provided by the inverse ofivar
.The method first calculates \(\rho_{ij}\) if it hasn’t been yet or the provided
sigma_rho
and/orrlim
values are different to previous calls, which buildsapprox_correl
. Ifapprox_correl
is not yet constructed,sigma_rho
andrlim
must be provided.The returned covariance matrix is the correlation matrix rescaled by the variance provided by
ivar
for the specified channel.- Parameters
channel (
int
) – Index of the spectral channel for which to calculate the covariance matrix.sigma_rho (
float
, optional) – The \(\sigma_{\rho}\) of the Gaussian function used to approximate the trend of the correlation coefficient with spaxel separation.rlim (
float
, optional) – The limiting radius of the image reconstruction (Gaussian) kernel in arcseconds.rho_tol (
float
, optional) – Any correlation coefficient less than this is assumed to be equivalent to (and set to) 0.csr (
bool
, optional) – Instead of returning amangadap.util.covariance.Covariance
object, return the covariance matrix as a scipy.sparse.csr_matrix object. Primarily used byapproximate_covariance_cube()
for collating the covariance matrix of each wavelength channel before combining them into a singlemangadap.util.covariance.Covariance
object.quiet (
bool
, optional) – Suppress terminal output
- Returns
mangadap.util.covariance.Covariance
, scipy.sparse.csr_matrix: The approximate covariance matrix for the designated wavelength channel. The return type depends on csr.
- binned_on_sky_area(bin_indx)[source]
Compute the on-sky area of a set of binned spectra.
For each bin, this is just the number of spaxels in the bin multiplied by the spaxel area.
- Parameters
bin_indx (array-like) – An array with size \(N_{\rm spec}\) that gives which spaxels were included in each bin. Valid bins have indices of \(\geq 0\).
- Returns
Two numpy.ndarray objects are returned. The first has the unique (non-negative) bin indices, and the second provides the on-sky area of that bin.
- Return type
tuple
- property can_analyze
Confirm that the DAP can analyze the datacube.
The only requirement is:
the \(cz\) velocity (
'vel'
inmeta
) must be greater than -500 km/s.
- Returns
Flag whether or not the DAP can analyze the datacube.
- Return type
bool
- property can_compute_covariance
Determine if the object can be used to compute the spatial covariance.
If
covar
is currently not defined, the method tries to load the row-stacked spectra used to build the datacube; seeload_rss()
. If that is successful or ifcovar
is already defined, the method returns True. Ifcovar
is None and the row-stacked spectra cannot be loaded, the method returns False.- Returns
Flag that the object can be used to calculate the spatial covariance.
- Return type
bool
- central_wavelength(waverange=None, response_func=None, per_pixel=True, flag=None, fluxwgt=False)[source]
Determine the mean central wavelength for all spectra under various conditions.
The wavelength channel is set to be the center of the bandpass selected by
waverange
, weighted by the response function and the flux (if requested/provided). The mask is also incorporated in these calculations. By default (i.e., no wavelength limits or weighting) the wavelength channel is just the central wavelength of the full spectral range. (Note that if the spectra are binned logarithmically, this isn’t necessarily the central wavelength channel.)- Parameters
waverange (array-like, optional) – Starting and ending wavelength over which to calculate the statistics. Default is to use the full wavelength range.
response_func (array-like, optional) – A two-column array with the wavelength and transmission of a broad-band response function to use as a weighting function for the calculation.
per_pixel (
bool
, optional) – When providing a response function, base the calculation on per pixel measurements, instead of per angstrom. Set to False for a per-angstrom calculation.flag (
str
,list
, optional) – One or more flag names that are considered when deciding if a pixel should be masked. The names must be a valid bit name as defined bybitmask
. Ifbitmask
is None, these are ignored.fluxwgt (
bool
, optional) – Flag to weight by the flux when determining the mean coordinates.
- Returns
The mean central wavelength of all spectra.
- Return type
float
- copy_to_array(attr='flux', waverange=None, nbins=None, select_bins=None, missing_bins=None, unique_bins=None)[source]
Return a copy of the selected data array with a flattened spatial axis.
The array size is always \(N_{\rm spec} \times N_{\rm wavelength}\). The spatial positions within the original datacube for each spectrum are given by tuples in
spatial_index
.See
copy_to_masked_array()
for argument descriptions.Warning
Any masking is ignored in this function call. To incorporate the mask use
copy_to_masked_array()
.- Returns
A 2D array with a copy of the data from the selected attribute.
- Return type
- copy_to_masked_array(attr='flux', use_mask=True, flag=None, waverange=None, nbins=None, select_bins=None, missing_bins=None, unique_bins=None)[source]
Return a copy of the selected data array as a masked array with a flattened spatial axis.
The array size is always \(N_{\rm spec} \times N_{\rm wavelength}\). The spatial positions within the original datacube for each spectrum are given by tuples in
spatial_index
.This is functionally identical to
copy_to_array()
, except the output format is a numpy.ma.MaskedArray. The pixels that are considered to be masked can be specified using the flag option.- Parameters
attr (
str
, optional) – The attribute for the returned array. Can be ‘flux’, ‘ivar’, ‘sres’, or ‘mask’. For ‘mask’, you’re likely better off usingcopy_to_array()
. Strings are always set to be lower-case, so capitalization shouldn’t matter.use_mask (
bool
, optional) – Use the internal mask to mask the data. This is largely here to allow forcopy_to_array()
to wrap this function while not applying the internal mask.waverange (array-like, optional) – Two-element array with the first and last wavelength to include in the computation. Default is to use the full wavelength range.
flag (
str
,list
, optional) – One or more bitmask flags used to select bad pixels. The names must be a valid bit name as defined bybitmask
(seemangadap.util.bitmask.BitMask
). If not provided, any non-zero mask bit is omitted.nbins (
int
, optional) – The total number of defined bins. Default is to find the maximum number in the unique_bins list.select_bins (array-like, optional) – A boolean array selecting spectra in the flattened cube (with shape \(N_{\rm spec} \times N_\lambda\)) to return.
missing_bins (
list
, optional) – A list of bin numbers that are missing from the output selection and that will be replaced with masked spectra. If specified, must also provideunique_bins
.unique_bins (array-like, optional) – The indices of the bins that have valid spectra. The length of this array should match the number of selected spectra from
select_bins
.
- Returns
A 2D array with a copy of the data from the selected extension, masked where
mask
is either True or with the selected bitmask flags.- Return type
- Raises
AttributeError – Raised if
attr
is not a valid attribute.ValueError – Raised if the unique bins are not specified, but the missing bins are, or if the number of unique bins does not match the number of spectra in the datacube.
- covariance_cube(**kwargs)[source]
Construct the formal covariance matrix for one or more channels.
This is a simple wrapper for a call to
mangadap.spectra.rowstackedspectra.RowStackedSpectra.covariance_cube()
executed usingrss
, which cannot be None. See that method for the argument description.Warning
The provided rectifications parameters should be the same as used to construct the datacube. If not, the calculated covariance matrix will not be correct.
- covariance_matrix(channel, **kwargs)[source]
Construct the formal covariance matrix for the provided channel.
This is a simple wrapper for a call to
mangadap.spectra.rowstackedspectra.RowStackedSpectra.covariance_matrix()
executed usingrss
, which cannot be None. See that method for the argument description.Warning
The provided rectifications parameters should be the same as used to construct the datacube. If not, the calculated covariance matrix will not be correct.
- static do_not_fit_flags()[source]
Return the maskbit names that should not be fit.
The base class returns
None
.
- static do_not_stack_flags()[source]
Return the maskbit names that should not be stacked.
The base class returns
None
.
- static do_not_use_flags()[source]
Return the maskbit names that should not be used.
The base class returns
None
.
- property file_path
Return the full path to the input file.
Warning
The required attributes for this method are not defined by the base class. If the attributes
directory_path
orfile_name
do not exist or if either of them are None, this returns None.
- flux_stats(waverange=None, response_func=None, per_pixel=True, flag=None)[source]
Compute the mean flux, propagated error in the mean flux, and mean S/N over the specified wavelength range.
If the wavelength range is not specified, the quantities are calculated over the full spectral range.
- Parameters
waverange (array-like, optional) – Starting and ending wavelength over which to calculate the statistics. Default is to use the full wavelength range.
response_func (array-like, optional) – A two-column array with the wavelength and transmission of a broad-band response function to use as a weighting function for the calculation.
per_pixel (
bool
, optional) – When providing a response function, continue to calculate the statistics per pixel. Set to False for a per-angstrom calculation.flag (
str
,list
, optional) – One or more flag names that are considered when deciding if a pixel should be masked. The names must be a valid bit name as defined bybitmask
.
- Returns
Three objects are returned: the mean flux, the propagated variance in the mean flux, and the mean S/N. The shape of each is the same as the shape of a single wavelength channel in the datacube (i.e.,
spatial_shape
).- Return type
- Raises
ValueError – Raised of a provided wavelength range object does not have two elements or if a response function is provided and has an incorrect shape.
- classmethod from_config(cfgfile, **kwargs)[source]
Construct a datacube object using a configuration file.
The method is undefined for the base class. If called, an exception is raised. Derived classes must override this method to allow for a configuration file to be used to instantiate the relevant
DataCube
subclass.- Parameters
cfgfile (
str
) – Configuration file. See configparser.ConfigParser.**kwargs – Any other keyword arguments that invoke optional instantiation methods. Note that these arguments will never be used in a command-line level execution of the DAP. They should only be available for custom scripts.
- instrument = None
The name of the instrument used to collect the data. This is only used in construction of the root name for output files. See
output_root()
.
- interpolate_to_match(func, fill_value=0.0)[source]
Interpolate a function to match the datacube wavelength sampling.
- Parameters
func (numpy.ndarray) – Function to linear interpolate. Shape is \((N_{\rm wave}, 2)\), where the first column has the wavelength and the second has the function to interpolate. If None, simply returns a unity vector of the correct length.
fill_value (
float
, optional) – The value to use for spectral regions not sampled by the provided function.
- Returns
The function interpolated (not resampled) to match
wave
. Any spectral regions not within the wavelength range of the provided function is set to 0.- Return type
- load_rss(**kwargs)[source]
Try to load the source row-stacked spectra for this datacube.
This method is undefined in the base class, and simply passes.
Derived classes should override this method if it’s possible to load the row-stacked spectra. If the load is successful,
rss
should no longer be None.
- mean_sky_coordinates(center_coo=None)[source]
Compute the mean sky coordinates for each spectrum.
If the WCS is available, the coordinates can be returned in RA and declination (degrees). If center coordinates are provided (see
center_coo
), however, the coordinates are offset set as follows:\[\begin{split}x &= (\alpha - \alpha_0) \cos \delta_0 \\ y &= (\delta - \delta_0),\end{split}\]where \((\alpha_0, \delta_0)\) are the provided coordinates.
If the WCS is not available, the returned coordinates are in arcsec from the center of the image (regardless of the value of
center_coo
) determined using the pixelscale. At least in this case, the coordinates are assumed to be relative to the pixel center (not, e.g., its edge).- Parameters
center_coo (
tuple
, optional) – A two-tuple with the coordinates in right-ascension and declination for the coordinate-frame origin. If None, no offset is performed.- Returns
Two numpy.ndarray objects with the RA and declination of each pixel in degrees, or its offset from the center in arcseconds. In both cases the shape of the returned arrays matches the spatial shape of the datacube.
- Return type
tuple
- property nspec
Number of spectra in the datacube.
- property output_root
- populate_metadata()[source]
Populate and validate the
DataCube
metadata (inmeta
) to ensure the it can be analyzed by the DAP.The only required metadata keyword is
z
, which sets the initial guess for the bulk redshift of the galaxy. If this key is not available or its value doesn’t meet the criterion below, this function will raise an exception, meaning the DAP will fault before it starts processing the DataCube.The metadata provided must meet the following critical criteria or the method will fault:
Velocity (\(cz\)) must be greater than -500.
For the remainder of the metadata, if the keyword does not exist, if the value is None, or if the value is outside the accepted range, a default is chosen. The metadata keywords, acceptable ranges, and defaults are provided below.
Keyword
Range
Default
vdisp
\(\sigma > 0\)
100
ell
\(0 \leq \varepsilon < 1\)
None
pa
\(0 \leq \phi_0 < 360\)
None
reff
\(R_{\rm eff} > 0\)
None
ebv
\(E(B-V) \geq 0\)
None
drpcrit
True or False
False
All other metadata in
meta
are ignored.If they do not already exist in
meta
, this method adds the following keywords:z
: The bulk redshift of the galaxy, used to calculate \(cz\).vel
: The initial guess velocity (\(cz\)) in km/s.vdisp
: The initial guess velocity dispersion in km/s.ell
: The isophotal ellipticity (\(1-b/a\)) to use whencalculating semi-major axis coordinates.
pa
: The isophotal position angle in deg from N through E, used when calculating semi-major axis coordinates.reff
: The effective radius in arcsec (DataCube WCS coordinates are expected to be in deg), used as a normalization of the semi-major axis radius in various output data.ebv
: The E(B-V) Galactic reddening along the line-of-sight to the galaxy.drpcrit
: A flag that indicates critical failures in the data reduction (True implies poor data quality). In MaNGA, the DRP will flag datacubes as having CRITICAL failures, but the survey approach was to run the DAP on these datacubes anyway. This flag is then used to propagate the caution in using the data analysis products to the user.